OBEX™ Bar

OBEX™ Bars are designed with a unique aluminum click-in system for simple installation directly on premises.

  • Bars can be cut to fit any application—whether surface mounted on the floor or installed in recessed mat wells.

  • Bars feature our Cut textile or Monofilament inserts with added backing for built-in sound insulation.

  • OBEX™ Bars are easy to install in a recessed mat well or surface mounted. Simple tools such as an electric handsaw can be used if adjustments on-site are required.

  • SURFACE MOUNTED: For surface mounted installations, OBEX Bars feature a complete edging system and corners.

  • RECESSED: For installation in recessed areas, OBEX Bars combine with start and finish profiles in “J” shape for a perfect finished look.

  • The closed structure of the OBEX Bar profile system allows for cleaning on-site without having to move or lift the product.

  • Daily vacuuming is recommended; hot water extraction should be used if soiling remains visible after vacuuming.

Available Colors

Mono Inserts

CutX Inserts

Transitions

Specifications & Downloads

  • Extruded Aluminum Profile with high

    density polyethylene foam base layer

  • 27.6 cm x 100 cm (10.87" x 39.4")

  • 11 mm (0.43")

  • Aluminum (silver)

  • 7 planks, 20.8 ft2 (1.93 m2)

  • Tufted, Cut Pile

  • Mono: ECONYL® Nylon Monofilament

    CutX: Milliken-Certified WearOn® Nylon and Monofilament

  • Daily Vacuum, Deep Clean via Hot

    Water Extraction

  • Ashlar for Recessed or Surface installs

  • Mono: Zone 1 or Zone 2

    CutX: Zone 2

  • 1 Year Manufacturing Defect Warranty

    5 Year Wear Warranty

  • Solution Dyed

  • Mono: 18.9 oz/yd² (640 g/m²)

    CutX: 24 oz/yd² (814 g/m²)

  • Mono: 17.8% Pre-Consumer, 8.0% Post-Consumer

    CutX: 17.4% Pre-Consumer, 0.0% Post-Consumer

  • Mono: 26.1 oz/ft² (7,959 g/m²)

    CutX: 26.7 oz/ft² (8,133 g/m²)

  • ≥ 0.45 (Class I)

  • ≤ 450

  • Self-Extinguishing

  • ≥ 4.0 at 80 hours

  • 11,023 lbs (5,000 kg)

  • No noticeable deformation or damage

    to the structural integrity with a 400

    pound per wheel at 2,500 cycles with

    load applied to a 200 mm diameter, 32

    mm wide rubber tread castor.

  • -22°F to +122°F (-30°C to +50°C)

Let’s work together.